带电清洗剂如何挑选_有什么特点?
2020-03-27 11:00
广州市海日环保带电清洁工程有限公司是专业从事带电清洗剂、带电清洗设备、带电清洗技术研发、生产、服务一体化的技术企业,尤其在电力电网设备、发电设备,电信、移动通信设备、各类电子设备的带电清洗工程、在化学清洗剂的研制、带电清洗技术服务等方面,为电信、电力设备的安全、高效运行尽心尽力。我们的网址是gzshr.com/。
Guangzhou sea day charged clean environmental protection engineering co., LTD is a professional engaged in charged cleansing agents, charged cleaning equipment, electric cleaning technology research and development, production, service integration of technology companies, particularly in the power grid equipment, power generation equipment, telecommunications, mobile communications equipment, all kinds of electronic equipment of charged cleaning project, in the development of chemical cleaning agents, charged cleaning technology services, etc., for telecom, electric power equipment realize safe and efficient operation.Our website is gzshr.com/.
关键词:带电清洗,电脑带电清洗,北京带电清洗,带电清洗剂,高压清洗机,高压清洗机价格。
Key words: live cleaning, computer live cleaning, Beijing live cleaning, live cleaning agent, high pressure cleaning machine, high pressure cleaning machine price.
如何挑选带电清洗剂
How to choose electric cleaning agent
(1)耐清洗试验方法test method for resistance to cleaning
浸泡法,温度(40±2)℃,时间360h,对插接件、大功率管、电容器、电阻、三极管、集成块测试后认为标志清晰,无脱落,无发粘,无腐蚀,管脚无变色为优。
After immersion test, the temperature is (40 + 2) C, and the time is 360h. After testing for connectors, high-power tubes, capacitors, resistors, transistors and integrated blocks, it is considered that the signs are clear, no falling off, no sticky, no corrosion, and no color change on the pins.
(2)对线材的电压腐蚀率测试法 test method of voltage corrosion rate for wire rod
直流电压(250±5)V,温度(40±2)℃,浸泡时间48h,测试结果对电子元器件,基本线材(铜线、银线、镀锡线)无腐蚀。等级为优级。
DC voltage (250 + 5) V, temperature (40 + 2) C, soaking time 48h, the test results of electronic components, basic wire (copper wire, silver wire, tinned wire) without corrosion. High grade.
(3)蒸发速度和残留量测定法determination of evaporation rate and residue
清洗剂5g置于平底玻璃器皿内40h,其残留量为1.1×10-5g/cm2,结论为挥发性能良好,无残留物。
The detergent 5g was placed in the flat bottom glassware with a residual amount of 1.1 x 10-5g/cm2, and the conclusion was that the volatilization performance was good and no residue was found.
(4)对铜镜的腐蚀试验法test method of corrosion on the bronze mirror
浸泡法,温度(23±2)℃,浸泡24h,结论是镜面光亮,无变色,无脱落。等级为优级。
Immersion method, temperature (23 + 2) C, soak 24h, the conclusion is that the mirror bright, no discoloration, no shedding. High grade.
(5)绝缘电阻测试法insulation resistance test method
电压DC500V,电级为标准梳形电阻,其绝缘电阻值为3.5×1014Ω(技术指标为>109Ω)则为合格。
Voltage DC500V, electric level is standard comb type resistance, its insulation resistance value is 3.5 x 1014 omega (technical index > 109 omega) is qualified.
(6)绝缘漆包线耐压性能安全试验法 test method for resisting pressure performance of insulated enameled wire
对聚胺脂、聚脂、耐冷冻剂、复合漆等漆包线进行浸泡,温度(40±2)℃,时间72h,交流电50Hz,漏电流10mA,升压速度300V/t,测试结果:各种绝缘漆包线击穿电压下降均在10%以内,影响小,符合技术指标。
The polyurethane, polyester, resistance to refrigerants, paint and other composite enameled wire for immersion www.datongzhong.cnwww.shusongdaiz.cnwww.changshabanjia.com.cnwww.huanlianhulu.com.cn www.fangbaohulu.com.cnwww.baodingmenjin.cn temperature (40 + 2) C, 72h, AC 50Hz, 10mA leakage current, 300V/t speed boost, test results: all kinds of insulation enameled wire breakdown voltage decline were less than 10%, the impact of small, in line with technical indicators.
(7)是否符合带电清洗作业条件whether it meets the conditions of charged cleaning operation
标准绝缘油试验方法的击穿电压为30.6kV,清洗剂液柱的击穿电压为350kV/m,其绝缘性能较好,可用于带电清洗作业。
The breakdown voltage of standard insulation oil test method is 30.6kV, and the breakdown voltage of the cleaning liquid column is 350kV/m, which has better insulation performance and can be used for live cleaning operation.
电子带电清洗剂特点Characteristics of electronic live cleaning agent
1、安全环保,阻燃,无闪点,不含CFC和HCFC。
1. Safety and environmental protection, flame retardant, no flash point, excluding CFC and HCFC.
2、对塑胶塑料和橡胶无腐蚀,快干不残留。
2. No corrosion to plastic and rubber, no residue in quick drying.
3、迅速清除灰尘、油污、助焊剂、湿气、静电、金属粉末等其它污垢。
3. Quickly remove dust, oil, flux, moisture, static electricity, metal powder and other dirt.
4、能溶解及冲去导电接点间的氧化物及污渍,防止接点导电不良。
4. It can dissolve and flush the oxides and stains between conductive contacts to prevent poor contact conductivity.